{"product_id":"product-20582","title":"New Car Dent Pulling Repair Tools Auto Body Sheet Metal Paintless Uitdeukset Pro","description":"\u003cp\u003eNote:This product does not contain glue gun and glue stick, if you need, need to buy another.\u003cbr\u003e\nPacking lncluded:\u003cbr\u003e\n【Short Puller Kit】\u003cbr\u003e\n1x Short T Bar\u003cbr\u003e\n18x Short Blue Tabs (6 Sizes)\u003cbr\u003e\n【44cm Puller Kit】\u003cbr\u003e\n20x Short Blue Tabs (5 Sizes)\u003cbr\u003e\n1x 44cm T Bar Tools\u003cbr\u003e\n【50cm Puller Kit】\u003cbr\u003e\n20x Short Blue Tabs (5 Sizes)\u003cbr\u003e\n1x 50cm T Bar Tools\u003cbr\u003e\n【6 Pcs】\u003cbr\u003e\n4 * Long Blue Tabs (2 Sizes)\u003cbr\u003e\n2 * Holder  (2 Sizes)\u003cbr\u003e\nDescription:\u003cbr\u003e\nThis Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased.\u003cbr\u003e\nThe tension puller works well with a tap down hammer when pulling large dents.\u003cbr\u003e\nIt's very easy to control, everyone can removal the dent easily by yourself.\u003cbr\u003e\nDescription:\u003cbr\u003e\nThis Paintless Dent Repair T-Bar puller is a lightweight glue tab pulling tool, meant to be used when repairing pressure dents and any dent that isn't sharp or creased.\u003cbr\u003e\nThe tension puller works well with a tap down hammer when pulling large dents.\u003cbr\u003e\nIt's very easy to control, everyone can removal the dent easily by yourself.\u003cbr\u003e\nHow to use: \u003cbr\u003e\n1.Clean the dent with a clean wet cloth;\u003cbr\u003e\n2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;\u003cbr\u003e\n3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the\u003cbr\u003e\ndrawing gasket is, the larger the drawing force is);\u003cbr\u003e\n4. Pull the trigger and apply the drawing gasket with extruded glue;\u003cbr\u003e\n5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);\u003cbr\u003e\n6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;\u003cbr\u003e\n7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;\u003cbr\u003e\n8. Clean the repaired place with a clean wet cloth.\u003c\/p\u003e","brand":"AutoMaximizer","offers":[{"title":"Puller Kit (No Glue)","offer_id":55273743417623,"sku":"E14-193","price":9.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/shop.automaximizer.com\/products\/product-20582","provider":"AutoMaximizer","version":"1.0","type":"link"}